SAP 

SAP Certification Level: Associate
Exam: 80 questions
Sample Questions: View more
Cut Score: 65%
Duration: 180 mins
Languages: English

Description
The “SAP Certified Application Associate – SAP S/4HANA Production Planning and Manufacturing” certification exam validates that the candidate possesses the fundamental and core knowledge required of the SAP S/4HANA Manufacturing consultant profile. This certification proves that the candidate has an overall understanding and in‐depth technical skills to participate as a member of a project team in a mentored role.

Topic Areas
Please see below the list of topics that may be covered within this certification and the courses that cover them. Its accuracy does not constitute a legitimate claim; SAP reserves the right to update the exam content (topics, items, weighting) at any time.

Examkingdom SAP C_TS422_2022 Exam pdf,

MCTS Training, MCITP Trainnig

Best SAP C_TS422_2022 Downloads, SAP C_TS422_2022 Dumps at Certkingdom.com

Advanced Planning in SAP S/4HANA > 12%
Outline the basics and master data of advanced planning, explain tools (alert monitor, detailed scheduling planning board) and advanced planning and detailed scheduling processes, explain planning evaluation concepts
TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)
—– OR —–
S4220 (SAP S/4HANA OP 2022)
(or: S4222_23 and S4224_23)

Production Orders in SAP S/4HANA > 12%
Determine BOM item category, describe order status management and set user statuses, configure availability check for components, trigger routing selection, set up an order type, apply material staging and confirmation.
TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4225 (SAP S/4HANA 2022)

Master Data in SAP S/4HANA > 12%
Identify and explain production relevant master data, including, but not limited to: bill of material, routing and production version.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4210 (SAP S/4HANA 2022)

Material Requirements Planning in SAP S/4HANA 8% – 12%
Select and apply planning strategies, use the planning table, characterize long-term planning and master production scheduling, outline MRP basics and steps of MRP, and describe lot size procedures.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4220 (SAP S/4HANA OP 2022) (or: S4222_23 and S4224_23)

Lean Manufacturing in SAP S/4HANA 8% – 12%

Identify repetitive manufacturing specific master data, explain line load planning and confirmation, outline Kanban master data and Kanban processes.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4200 (SAP S/4HANA 2022)

Capacity Planning in SAP S/4HANA 8% – 12%
Outline best practices for using SAP S/4HANA, describe the SAP HANA database concept and new user experience with SAP Fiori, outline the capabilities of embedded analytics.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4230 (SAP S/4HANA 2022)

Demand Management in SAP S/4HANA < 8%


Explain and compare the different production methods in make-to-order, make-to-stock, and assembly planning.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4220 (SAP S/4HANA OP 2022) (or: S4222_23 and S4224_23)

Introduction to SAP S/4HANA Production Planning < 8%
Outline production planning components and functions, differentiate consumption-based planning vs. MRP, outline new trends in production planning.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4220 (SAP S/4HANA OP 2022)
(or: S4222_23 and S4224_23)

Introduction to SAP S/4HANA Supply Chain Planning < 8%
Outline both motivation and background of SAP S/4HANA, describe its main components, the lines of business, and the SAP User Experience strategy.

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4200 (SAP S/4HANA 2022)

Process Orders in SAP S/4HANA < 8%
Characterize process order elements and process order processing, determine master data objects for process orders, identify features for Good Manufacturing Practices (GMP).

TS421 (SAP S/4HANA 2022)
TS422 (SAP S/4HANA 2022)

—– OR —–

S4200 (SAP S/4HANA 2022)

General Information

Exam Preparation
All SAP consultant certifications are available as Cloud Certifications in the Certification Hub and can be booked with product code CER006. With CER006 – SAP Certification in the Cloud, you can take up to six exams attempts of your choice in one year – from wherever and whenever it suits you! Test dates can be chosen and booked individually.

Each specific certification comes with its own set of preparation tactics. We define them as “Topic Areas” and they can be found on each exam description. You can find the number of questions, the duration of the exam, what areas you will be tested on, and recommended course work and content you can reference.

Certification exams might contain unscored items that are being tested for upcoming releases of the exam. These unscored items are randomly distributed across the certification topics and are not counted towards the final score. The total number of items of an examination as advertised in the Training Shop is never exceeded when unscored items are used.

Please be aware that the professional- level certification also requires several years of practical on-the-job experience and addresses real-life scenarios.

For more information refer to our SAP Certification FAQs.

Safeguarding the Value of Certification

SAP Education has worked hard together with the Certification & Enablement Influence Council to enhance the value of certification and improve the exams. An increasing number of customers and partners are now looking towards certification as a reliable benchmark to safeguard their investments. Unfortunately, the increased demand for certification has brought with it a growing number of people who to try and attain SAP certification through unfair means. This ongoing issue has prompted SAP Education to place a new focus on test security. Our Certification Test Security Guidelines will help you as test taker to understand the testing experience.

Security Guidelines


Sample Question and Answers

QUESTION 1
Which of the following are possible configuration steps when setting up the alert monitor in Advanced Planning?
Note: There are 2 correct answers to this question.

A. Create an object selection variant for priority-category-related alerts.
B. Assign the alert profile to the overall profile.
C. Create an object selection variant for production-planning-related alerts.
D. Assign the overall profile to the authorization profile.

Answer: B, C

QUESTION 2
where does the system check master data selection settings during the creation of planned orders and production orders?
Note: There are 3 Correct answers to this question.

A. in the bill of material (BOM)
B. in the work centers
C. in the MRP controller
D. In the routing
E. in the production version

Answer: A, C, D

QUESTION 3
You use planning strategy Finite Scheduling with Reverse and want to allow scheduling the past. How can you parameterize this in the strategy profile?

A. Specify a negative planning horizon.
B. Specify a positive planning horizon.
C. Specify a positive offset time.
D. Specify a negative offset time.

Answer: D

QUESTION 4
What is the purpose of a reporting point confirmation in repetitive manufacturing?
Note: There are 2 Correct answers to this question?

A. To determine the work in progress along the production line
B. To provide timely updates of inventory management for the staged components
C. To reduce the total production lead time for a long production line
D. To stage different components for a production line simultaneously

Answer: A, B

QUESTION 5
Generic Parent » Generic 1 pt
What is the purpose of collective orders?

A. To manage production orders for an entire finished product on multiple levels
B. To combine order management of co-products and by-products with the main product
C. To post production costs on a cost collector instead of the production order
D. To post any component withdrawal as single backflush with order confirmation

Answer: A

QUESTION 6
You want to schedule an operation finitely, without removing other operations. Which scheduling\ strategy do you select?

A. Insert operation
B. Squeeze in
C. Schedule in working time only
D. Find Slot

Answer: D

QUESTION 7
When you create a sales order
When can consumption of planned independent requirements take place for planning strategy 40
(Planning with final assembly?

A. When MRP creates a dependent requirement
B. When MRP creates a planned order
C. When you create a sales order
D. When MRP creates a planned order

Answer: C

Click to rate this post!
[Total: 0 Average: 0]
News Reporter

Leave a Reply

Your email address will not be published. Required fields are marked *